JUKI DP2100 - Operation of the Sewing Machine (Semi-Automatic Application Volume); Copying the pattern <Pattern copy>

− 42 −
1
2
3
5
6
4
(9) Naming the pattern <Data name setting>
1) Press READY key 1 to change over the
screen to data input screen A.
2) Press LETTER INPUT button 2.
3) Press LETTER buttons 3 to input
the letter.
4) Cursor in the inputted letter display B can be
moved with CURSOR MOVE, LEFT (RIGHT)
buttons ( ) 4.
5) When DELETION button 5 is pressed,
the letter on the left side of cursor disappears.
6) Press ENTER button 6.
7) Inputted letters are displayed in the pattern name
display section C.
C
A
B