JUKI DP2100 - Page 125

− 119 −
!4
!3
When MODE key !3 is pressed, the data
input screen is displayed. Press STEP DETAILS
SETTING button !4 to open the step
details screen.
7) Select Compensation tension manual
(level) setting screen.
Press Compensation thread tension
setting button !5 in the screen to display
the compensation thread tension pop-up screen.
!5
8) Set the compensation tension manual (level).
Select the level of compensation thread tension
for the step to be selected.
Compensation thread tension value set to the
selected level is added to or subtracted from the
needle thread tension value as the offset value.
When ENTER button !6 is pressed, the
compensation thread tension pop-up screen is
closed and the compensation thread tension set
value is determined. And, the screen returns to
the step details screen.
!6