JUKI DP2100 - Operation of the Sewing Machine (Semi-Automatic Application Volume); Correcting the pattern

− 31 −
1
6. OPERATION OF THE SEWING MACHINE (SEMI-AUTOMATIC APPLICATION VOLUME)
6-1 Correcting the pattern
2
4
A
5
(1) Changing the needle thread tension of specified step <Compensation thread tension setting>
*This is the function to add the needle thread
tension of the specified step to the overall needle
thread tension as much as "compensation needle
thread tension set value".
1) Press STEP SELECTION button 1
to select the step.
2) Press STEP DETAILS button 2.
3) Press COMPENSATION THREAD TENSION
button 3.
4) Press ten keys 4 to change
compensation thread tension set value A.
5) Press ENTER button 5.
3