− 46 −
6
4
3
5
7
3) Press ten keys 3 to input the new
pattern No.
4) Press ENTER button 4.
5) Change the pitch.
Refer to "5-6 (2) Changing the pitch".
6) Select left/right alternate sewing.
Refer to "5-5 (4) Select left/right alternate
sewing".
7) Press SHIRRING AMOUNT button
5 to input shirring amount.
8) Press STEP DETERMINATION button 6
to determine the input data.
9) Repeat procedures 7) and 8).
10) After inputting shirring amount of the last step,
press ENTER button 7 and the program
of inputted sleeve is registered to the pattern.
At this time, the program of the other sleeve is
automatically created by means of mirroring.
To Next Page
Loading...
