JUKI DP2100 - Page 58

− 52 −
No. Button Name of button Description
@9 LENGTH BETWEEN STEPS When the button is pressed, length between steps setting screen
SETTING button is displayed.
#0 GRADING VALUE SETTING When the button is pressed, grading value setting screen is
button displayed.
#1 COMPENSATION THREAD When the button is pressed, compensation thread tension setting
TENSION SETTING button screen is displayed.
#2 COMPENSATION PITCH When the button is pressed, compensation pitch setting screen is
SETTING button displayed.
#3 START POSITION CHANGE When the button is pressed, start position change screen is
button displayed.
#4 MIRRORING button When the button is pressed, mirroring screen is displayed.
#5 COMPENSATION SHIRRING When the button is pressed, compensation shirring amount setting
AMOUNT SETTING button screen is displayed.
#6 STEP ADDITION button When the button is pressed, step addition screen is displayed.
#7 STEP DELETION button When the button is pressed, step deletion screen is displayed.
N LENGTH BETWEEN STEPS Set value of length between steps is displayed.
display
O GRADING VALUE display Grading value is displayed.
P COMPENSATION THREAD Set value of compensation thread tension is displayed.
TENSION display
Q COMPENSATION PITCH Set value of compensation pitch is displayed.
display
R COMPENSATION SHIRRING Set value of compensation shirring amount is displayed.
AMOUNT display
Sym- Display Name of display Description
bol