Juniper ACX5048 - Page 101

Table 38: SFP+ Active Direct Attach Copper Cable Specifications (continued)
SpecificationsProduct Number
10-Gbps full-duplex serial transmissionRateQFX-SFP-DAC-5MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
0.627 WPower consumption (per end)
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
1 in. (2.54 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
2% maximumCrosstalk between pairs
5 m (16.4 ft)Length
10-Gbps full-duplex serial transmissionRateQFX-SFP-DAC-7MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
0.627 WPower consumption (per end)
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
1 in. (2.54 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
2% maximumCrosstalk between pairs
7 m (23 ft)Length
81Copyright © 2015, Juniper Networks, Inc.
Chapter 7: Port and Interface Specifications