Juniper ACX5048 - Page 109

Table 44: Interface Specifications for Active Copper QSFP+ DAC Cables
SpecificationsProduct Number
40-Gbps full-duplex serial transmissionRateJNP-QSFP-DAC-5MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
0.015 WPower consumption
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
0.3 in. (0.762 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
% maximumCrosstalk between pairs
4.3 nsec/mTime delay
5 m (16.4 ft)Length
40-Gbps full-duplex serial transmissionRateJNP-QSFP-DAC-7MA
None. SFPs are permanently attached.Connector type
3.3 VSupply voltage
0.015 WPower consumption
–40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
0.3 in. (0.762 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
2 % maximumCrosstalk between pairs
4.3 nsec/mTime delay
7 m (22.9 ft)Length
89Copyright © 2015, Juniper Networks, Inc.
Chapter 7: Port and Interface Specifications