5. Repeat this procedure for the mounting bracket on the opposite side of the router.
Tighten all screws.
6. Use two people to attach the brackets to the posts.
a. Have one person grasp both sides of the router and lift it into place.
b. Ensure the router is level.
c. Have the second person use the fourmounting screws(and cage nuts and washers
if your rack requires them) to screw the mounting bracket to the rack.
7. Attach a ground cable to earth ground and then attach it to the chassis grounding
points, as described in “Connecting Earth Ground to an ACX5000 Router” on page 112.
Related
Documentation
• Rack-Mounting and Cabinet-Mounting Warnings
• Connecting AC Power to an ACX5000 Router on page 114
• Connecting DC Power to an ACX5000 Router on page 116
• Connecting Earth Ground to an ACX5000 Router on page 112
109Copyright © 2015, Juniper Networks, Inc.
Chapter 10: Installing the Router
To Next Page
Loading...
