Juniper ACX5048 - Page 150

request system halt
warning: This command will halt all the members.
If planning to halt only one member use the member option
Halt the system ? [yes,no] (no) yes
Shutdown at Thu Jul 30 21:20:07 2015.
[pid 2434]
{master:0}
*** System shutdown message from root@acx5k11-ac ***
System going down in 1 minute
root@>
*** System shutdown message from root@acx5k11-ac ***
System going down in 30 seconds
*** FINAL System shutdown message from root@acx5k11-ac ***
System going down IMMEDIATELY
Terminated
.
Hangup
Jul 30 21:20:23 init: event-processing (PID 1030) exited with status=0 Normal
Exit
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 0 0 0 done
syncing disks... All buffers synced.
Uptime: 10h20m10s
recorded reboot as normal shutdown
unloading fpga driver
Shutting down ACPI
Rebooting...
Stopping crond: [ OK ]
Running guests on default URI: no running guests.
Stopping libvirtd daemon: [ OK ]
Shutting down ntpd: [ OK ]
Shutting down system logger: [ OK ]
Shutting down sntpc: [ OK ]
Stopping sshd: [ OK ]
Stopping vehostd: [ OK ]
Stopping watchdog: [ OK ]
Stopping xinetd: [ OK ]
Sending all processes the TERM signal... [ OK ]
Sending all processes the KILL signal... [ OK ]
Saving random seed: [ OK ]
Syncing hardware clock to system time [ OK ]
Unmounting file systems: [ OK ]
init: Re-executiRE-FPGA-DRV: reboot notifier called with 0x0003
Copyright © 2015, Juniper Networks, Inc.130
ACX5048 and ACX5096 Universal Access Router