7. Place one hand under the power supply to support it and slide it completely out of
the chassis. Take care not to touch power supply components, pins, leads, or solder
connections.
8. Place the power supply in the antistatic bag or on the antistatic mat placed on a flat,
stable surface.
Figure 50: Removing Power Supply from an ACX5048
Figure 51: Removing Power Supply from an ACX5096
Related
Documentation
• Installing a Power Supply in an ACX5000 Router on page 137
• Connecting AC Power to an ACX5000 Router on page 114
• Connecting DC Power to an ACX5000 Router on page 116
• AC Power Supply for an ACX5000 Router on page 37
• DC Power Supply for an ACX5000 Router on page 39
Copyright © 2015, Juniper Networks, Inc.140
ACX5048 and ACX5096 Universal Access Router
To Next Page
Loading...
