Juniper ACX5048 - Page 95

Table 35: Interface Support for 40-Gigabit Ethernet QSFP+ Transceivers for ACX5000
Routers (continued)
Specifications
Ethernet
Standard
150 m (492 ft)100 m (328 ft)2 kmDistance
Parallel Single ModeJNP-QSFP-4x10GE-IRProduct
SKU
Number
4x10BASE
-IR
40 Gbps (10 Gbps per lane)Rate
Single mode fiber ribbon cable with female, MPO-APC connector (angled 8 degrees)
NOTE: See Cable Specifications for QSFP+ and QSFP28 Transceivers for more information.
Connector
type
12Fiber
count
Lanes 0 through 3–1310 nmLane
wavelength
(typical)
-6.0 dBm (per lane)Minimum
launch
power
1.5 dBm (per lane)Maximum
launch
power
–Minimum
receiver
sensitivity
AvailableDOM
support
SMFFiber type
9/125 µmCore/cladding
size
1.4 km (.9 miles)Distance
75Copyright © 2015, Juniper Networks, Inc.
Chapter 7: Port and Interface Specifications