Keithley 2600a series User Manual

2600AS-901-01 Rev. B / September 2008 Return to Section Topics 19-75
Series 2600A System SourceMeter® Instruments Reference Manual Section 19: Remote Commands
lan.reset
Function Resets the LAN interface.
TSP-Link
accessibility
This function can be accessed from a remote TSP-Link node.
Usage lan.reset()
Remarks • This function performs the following commands:
• lan.restoredefaults
• lan.applysettings
lan.restoredefaults
Function Restores the default LAN settings.
TSP-Link
accessibility
This function can be accessed from a remote TSP-Link node.
Usage lan.restoredefaults()
Remarks • This function restores the following attributes:
lan.autoconnect lan.ENABLE
lan.config.dns.address[n] “0.0.0.0”
lan.config.dns.domain ““
lan.dns.dynamic lan.ENABLE
lan.config.hostname ““
lan.config.dnsverify lan.ENABLE
lan.config.duplex lan.FULL
lan.config.gateway “0.0.0.0”
lan.config.ipaddress “192.168.0.2”
lan.config.method lan.AUTO
lan.config.speed 100
lan.config.subnetmask “255.255.255.0”
lan.linktimeout 20 (in seconds)
lan.lxidomain 0
lan.nagle lan.ENABLE
lan.timedwait 20 (in seconds)
• You cannot use this function to reset the LAN password.
• To reset the LAN password, use the attribute localnode.password.
lan.status.dns.address[N]
Attribute Stores the DNS server IP address.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage dnsaddress = lan.status.dns.address[index]
index The entry index.
dnsaddress The DNS server IP address.

Keithley 2600a series Specifications

General

Brand	Keithley
Model	2600a series
Category	Measuring Instruments
Language	English