Keysight Technologies 33210A - Pulse Waveform; Pulse Period

3 Features and Functions
100 Keysight 33210A User’s Guide
Pulse Waveform
– Pulse is the only waveform shape supported for PWM.
– Front-Panel Operation: Press .
– Remote Interface Operation:
FUNCtion {PULSe}
You can also use the APPLy command to select the function, frequency ,
amplitude, and offset with a single command.
Pulse Period
The range for the pulse period is 200 ns to 1000 s. The default is 1 ms.
– Front-Panel Operation: After selecting the pulse function, press the Freq
softkey again to toggle to the Period softkey. Then use the knob or numeric
keypad to enter the desired pulse period.
– Remote Interface Operation:
PULSe:PERiod {<seconds>|MINimum|MAXimum}