3 Features and Functions
66 Keysight 33210A User’s Guide
Introduction
This chapter makes it easy to look up all the details about a particular feature of
the function generator. It covers both front panel and remote interface operation.
You may want to read Chapter 2, "Front-Panel Menu Operation", first. See
Chapter 4, "Remote Interface Reference" for a detailed discussion of the syntax of
the SCPI commands to program the function generator. This chapter is divided
into the following sections:
– Output Configuration on page 68
– Pulse Waveforms on page 83
– Amplitude Modulation (AM) on page 87
– Frequency Modulation (FM) on page 92
– Pulse Width Modulation (PWM) on page 99
– Frequency Sweep on page 105
– Burst Mode on page 112
– Triggering on page 121
– Optional Arbitrary Waveforms (Option 002) on page 127
– System-Related Operations on page 134
– Remote Interface Configuration on page 143
– External Timebase Reference (Option 001) on page 153
– Calibration Overview on page 155
– Factory Default Settings on page 159
Throughout this manual “default” states and values are identified. These are the
power-on default states provided you have not enabled the power-down recall
mode (see “Instrument State Storage” on page 134).
To Next Page
Loading...
