Keysight Technologies 33210A - Arbitrary Waveform Commands

Remote Interface Reference 4
Keysight 33210A User’s Guide 171
Arbitrary Waveform Commands
(see page 240 for more information)
[1]
DATA VOLATILE, <value>, <value>, . . .
DATA:DAC VOLATILE, {<binary block>|<value>, <value>, . . . }
FORMat:BORDer {NORMal|SWAPped}
Specify Byte Order
FORMat:BORDer?
DATA:COPY <destination arb name> [,VOLATILE]
FUNCtion:USER {<arb name>
[2]
|VOLATILE}
FUNCtion:USER?
FUNCtion USER
FUNCtion?
DATA
:CATalog?
:NVOLatile:CATalog?
:NVOLatile:FREE?
DATA:DELete <arb name>
DATA:DELete:ALL
DATA
:ATTRibute:AVERage? [<arb name>
[2]
]
:ATTRibute:CFACtor? [<arb name>
[2]
]
:ATTRibute:POINts? [<arb name>
[2]
]
:ATTRibute:PTPeak? [<arb name>
[2]
]
[1] Parameters shown in bold are selected following a *RST (reset) command.
NOTE
Arbitrary waveforms are optionally available with the 33210A (Option 002). To
upgrade your 33210A to include arbitrary waveform functionality, go to
www.keysight.com/find/33210U.
[2] The names of the built-in arb waveforms are: EXP_RISE, EXP_FALL, NEG_RAMP, SINC, and
CARDIAC.