Keysight Technologies 33210A - Interface Configuration Commands

4 Remote Interface Reference
174 Keysight 33210A User’s Guide
Interface Configuration Commands
(see page 261 for more information)
[1]
SYSTem:LOCal
SYSTem:REMote
SYSTem:RWLock
SYSTem:COMMunicate:RLSTate {LOCal|REMote|RWLock}
SYSTem:COMMunicate:GPIB
:ADDRess <address>
:ADDRess?
SYSTem:COMMunicate:LAN
:AUTOip[:STATe] {OFF|0|ON|1}
:AUTOip[:STATe]?
:IPADdress <address>
:IPADdress?
:LIPaddress?
:MAC?
:MEDiasense {OFF|0|ON|1}
:MEDiasense?
:NETBios {OFF|0|ON|1}
:NETBios?
:TELNet:PROMpt <string>
:TELNet:PROMpt?
:TELNet:WMESsage <string>
:TELNet:WMESsage?
[1] Parameters shown in bold are selected following a *RST (reset) command.