Keysight Technologies 33210A - Remote Interface Reference; Introduction

4 Remote Interface Reference
162 Keysight 33210A User’s Guide
Introduction
– SCPI Command Summary, on page 164
– Simplified Programming Overview, on page 178
– Using the APPLy Command, on page 180
– Output Configuration Commands, on page 189
– Pulse Configuration Commands, on page 202
– Amplitude Modulation (AM) Commands, on page 207
– Frequency Modulation (FM) Commands, on page 211
– Pulse Width Modulation (PWM) Commands, on page 215
– Frequency Sweep Commands, on page 221
– Burst Mode Commands, on page 229
– Triggering Commands, on page 237
– Arbitrary Waveform Commands (Option 002), on page 240
– State Storage Commands, on page 251
– System-Related Commands, on page 255
– Interface Configuration Commands, on page 261
– Phase-Lock Commands (Option 001 Only), on page 266
– The SCPI Status System, on page 268
– Status Reporting Commands, on page 278
– Calibration Commands, on page 282
– An Introduction to the SCPI Language, on page 284
– Using Device Clear, on page 290
SCPI
SCPI