Features and Functions 3
Keysight 33210A User’s Guide 141
– Remote Interface Operation: The following command turns off the front-panel
display.
DISP OFF
The following command displays a message on the front panel and turns on
the display if currently disabled.
DISP:TEXT 'Test in Progress...'
To clear the message displayed on the front panel (without changing the
display state), send the following command.
DISP:TEXT CLEAR
Number Format
The function generator can show numbers on the front-panel display with periods
or commas for the decimal point and digits separator. This feature is available
from the front panel only.
– The number format is stored in non-volatile memory and does not change
when power has been off or after a remote interface reset. When shipped from
the factory, a period is used for the decimal point and commas are used for the
digits separator (e.g., 1.000,000,00 kHz).
–
Front-Panel Operation
: Press and then select the
Number Format
softkey
from the “System” menu.
Decimal Point: Period
Digits Separator: Comma
Decimal Point: Comma
Digits Separator: None
To Next Page
Loading...
