Keysight Technologies 33210A - Modulation Commands

Remote Interface Reference 4
Keysight 33210A User’s Guide 167
Modulation Commands
(see page 207 for more information)
[1]
AM Commands
AM: INTernal
:FUNCtion {SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}
:FUNCtion?
AM: INTernal
:FREQuency {<frequency>|MINimum|MAXimum}
:FREQuency? [MINimum|MAXimum]
AM:DEPTh {<depth in percent>|MINimum|MAXimum}
AM:DEPTh? [MINimum|MAXimum]
AM:SOURce {INTernal|EXTernal}
AM:SOURce?
AM:STATe {OFF|ON}
AM:STATe?
FM Commands
FM: INTernal
:FUNCtion {SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}
:FUNCtion?
FM: INTernal
:FREQuency {<frequency>|MINimum|MAXimum}
:FREQuency? [MINimum|MAXimum]
FM:DEViation {<peak deviation in Hz>|MINimum|MAXimum}
FM:DEViation? [MINimum|MAXimum]
FM:SOURce {INTernal|EXTernal}
FM:SOURce?
FM:STATe {OFF|ON}
FM:STATe?
[1] Parameters shown in bold are selected following a *RST (reset) command.