1 Quick Start
22 Keysight 33210A User’s Guide
Introduction
One of the first things to do with your function generator is
to become acquainted
with the front panel. We have written the exercises
in this chapter to prepare the
instrument for use and help you get familiar with some of its front-panel
operations. This chapter is divided into the following sections:
– To Prepare the Function Generator for Use on page 23
– To Adjust the Carrying Handle on page 25
– To Set the Output Frequency on page 26
– To Set the Output Amplitude on page 28
– To Set a DC Offset Voltage on page 30
– To Set the High-Level and Low-Level Values on page 31
– To Select “DC Volts” on page 32
– To Set the Duty Cycle of a Square Wave on page 33
– To Configure a Pulse Waveform on page 34
– To View a Waveform Graph on page 35
– To Output a Stored Arbitrary Waveform on page 36
– To Use the Built-In Help System on page 37
– To Rack Mount the Function Generator on page 39
To Next Page
Loading...
