Keysight 33210A 10 MHz Function/Arbitrary Waveform Generator
User’s Guide
21
1 Quick Start
Introduction 22
To Prepare the Function Generator for Use 23
To Adjust the Carrying Handle 25
To Set the Output Frequency 26
To Set the Output Amplitude 28
To Set a DC Offset Voltage 30
To Set the High-Level and Low-Level Values 31
To Select “DC Volts” 32
To Set the Duty Cycle of a Square Wave 33
To Configure a Pulse Waveform 34
To View a Waveform Graph 35
To Output a Stored Arbitrary Waveform 36
To Use the Built-In Help System 37
To Rack Mount the Function Generator 39
To Next Page
Loading...
