Keysight Technologies 33210A - Pulse Configuration Commands

4 Remote Interface Reference
166 Keysight 33210A User’s Guide
Pulse Configuration Commands
(see page 202 for more information)
[1]
PULSe:PERiod {<seconds>|MINimum|MAXimum}
PULSe:PERiod? [MINimum|MAXimum]
FUNCtion:PULSe
:HOLD {WIDTh|DCYCle}
:HOLD?
:WIDTh {<seconds>|MINimum|MAXimum}
50% to 50% Thresholds
:WIDTh? [MINimum|MAXimum]
:DCYCle {<percent>|MINimum|MAXimum}
:DCYCle? [MINimum|MAXimum]
:TRANsition {<seconds>|MINimum|MAXimum}
10% to 90% Thresholds
:TRANsition? [MINimum|MAXimum]
[1] Parameters shown in bold are selected following a *RST (reset) command.