Keysight Technologies 33210A - SCPI Command Structure and Overview

4 Remote Interface Reference
164 Keysight 33210A User’s Guide
SCPI Command Summary
Throughout this manual, the following conventions are used for SCPI command
syntax for remote interface programming:
– Square brackets ( [ ] ) indicate optional keywords or parameters.
– Braces ( { } ) enclose parameters within a command string.
– Triangle brackets ( < > ) enclose parameters for which you must substitute a
value.
– A vertical bar ( | ) separates multiple parameter choices.
The APPLy Commands
(see page 180 for more information)
APPLy
:SINusoid [<frequency> [,<amplitude> [,<offset>] ]]
:SQUare [<frequency> [,<amplitude> [,<offset>] ]]
:RAMP [<frequency> [,<amplitude> [,<offset>] ]]
:PULSe [<frequency> [,<amplitude> [,<offset>] ]]
:NOISe [<frequency|DEF>
[1]
[,<amplitude> [,<offset>] ]]
:DC [<frequency|DEF>
[1]
[,<amplitude>|DEF>
[1]
[,<offset>] ]]
:USER [<frequency> [,<amplitude> [,<offset>] ]]
APPLy?
[1] This parameter has no effect for this command but you MUST specify a value or “DEFault”.