Keysight Technologies 33210A - Page 160

3 Features and Functions
160 Keysight 33210A User’s Guide
Keysight 33210A Factory Default Settings
Parameters marked with a bullet ( • ) are stored in non-volatile memory.
Output Configuration
Function
Frequency
Amplitude / Offset
Output Units
Output Termination
Autorange
Modulation
Carrier (AM, FM)
Carrier (PWM)
Mod. Waveform (AM)
Mod. Waveform (FM, PWM)
AM Depth
FM Deviation
PWM Width Deviation
Modulation State
Sweep
Start / Stop Frequency
Sweep Time
Sweep Mode
Sweep State
Burst
Burst Count
Burst Period
Burst Start Phase
Burst State
System-Related Operations
•
Power-Down Recall
Display Mode
Error Queue
Stored States, Stored Arbs
Output State
Triggering Operations
Trigger Source
Remote Interface Configuration
•
GPIB Address
•
DHCP
• Auto IP
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
• Host Name
• Domain Name
Calibration
•
Calibration State
Factory Setting
Sine wave
1 kHz
100 mVpp / 0.000 Vdc
Vpp
50Ω
On
Factory Setting
1 kHz Sine wave
1 kHz Pulse
100 Hz Sine wave
10 Hz Sine wave
100%
100 Hz
10 μs
Off
Factory Setting
100 Hz / 1 kHz
1 Second
Linear
Off
Factory Setting
1 Cycle
10 ms
0 degrees
Off
Factory Setting
•
Disabled
On
Errors are Cleared
No Change
Off
Factory Setting
Internal (Immediate)
Factory Setting
•
10
•
On
• On
• 169.254.2.20
• 255.255.0.0
• 0.0.0.0
• 0.0.0.0
• none
• none
Factory Setting
•
Secured