Quick Start 1
Keysight 33210A User’s Guide 29
You can easily convert the displayed amplitude from one unit to another. For
example, the following steps show you how to convert the amplitude from
Vrms to Vpp.
4 Enter the numeric entry mode.
Press the key to enter the numeric entry mode.
5 Select the new units.
Press the softkey that corresponds to the desired units. The displayed value is
converted to the new units. For this example, press the Vpp softkey to convert
50 mVrms to its equivalent in volts peak-to-peak.
To change the displayed amplitude by decades, press the right-cursor key to
move the cursor to the units on the right side of the display. Then, rotate the
knob to increase or decrease the displayed amplitude by decades.
Y
ou can also enter the desired value using the knob and cursor keys.
To Next Page
Loading...
