Keysight Technologies 33210A - Page 312

5 Error Messages
312 Keysight 33210A User’s Guide
-222
Data out of range;
period; value clipped to ...
This generic message indicates that the pulse period has been limited to an upper
or lower boundary.
-222
Data out of range;
frequency; value clipped to ...
This generic message indicates that the waveform frequency has been limited to
an upper or lower boundary.
-222
Data out of range;
user frequency; value clipped to upper limit
This generic message indicates that the waveform frequency has been limited to
an upper boundary due to the selection of the arbitrary waveform function
(APPL:USER or FUNC:USER command).
-222
Data out of range;
ramp frequency; value clipped to upper limit
This generic message indicates that the waveform frequency has been limited to
an upper boundary due to the selection of the ramp waveform function
(APPL:RAMP or FUNC:RAMP command).
-222
Data out of range;
pulse frequency; value clipped to upper limit
This generic message indicates that the waveform frequency has been limited to
an upper boundary due to the selection of the pulse waveform function
(APPL:PULS or FUNC:PULS command).