Keysight 81150A - Page 144

Appendix
144
Trail Delay
The trailing delay is the absolute delay from the start of the pulse period to
the start of the trailing edge. In this format the trailing edge remains fixed
relative to the start of the pulse period if you adjust the pulse-delay (leading-
edge delay) or the pulse period.
Remote Interface
Operation
The following function is used to configure the Pulse Width remotely:
:PULSe:WIDTh[1|2] {<seconds>|MINimum|MAXimum}
:PULSe:DCYCle[1|2] {<percent>|MINimum|MAXimum}
:PULSe:TDELay[1|2] {<seconds>|MINimum|MAXimum}
:PULSe:HOLD[1|2] {WIDTh|DCYCle|TDELay}
:FUNCtion[1|2]:PULSe:WIDTh{<seconds>|MINimum|
MAXimum}
:FUNCtion[1|2]:PULSe:DCYCle{<percent>|MINimum|
MAXimum}
:FUNCtion[1|2]:PULSe:TDELay{<seconds>|MINimum|
MAXimum}
:FUNCtion[1|2]:PULSe:HOLD {WIDTh|DCYCle|TDELay}