Appendix
182
3.7.2 Carrier Waveform Shape
AM carrier shape: Sine, Square, Ramp, or Arbitrary waveform.
The default is Sine. You cannot use pulse, noise, or dc as the carrier
waveform.
Press any of the front-panel function keys except or . For
arbitrary waveforms, press and then choose the Select Waveform
softkey to select the active waveform.
Remote Interface
Operation
:FUNCtion[1|2]{SINusoid|SQUare|RAMP|USER}
You can also use the APPLy command to select the function, frequency,
amplitude, and offset with a single command.
To Next Page
Loading...
