Keysight 81150A - 81150 A; 81160 A SCPI Instrument Command List Format

Remote Programming Reference
81150A and 81160A User’s Guide 317
4.4 81150A / 81160A SCPI Instrument Command List Format
Introduction
The following reference sections list the instrument commands in
alphabetical order. In addition to a command description, the attributes of
each command are described under the following headings. Not all of these
attributes are applicable to all commands. The commands are conform to
the IEEE 488.2 SCPI standard.
The following table presents some of the most common <suffix names>
elements used while referring to some units in the instrument.
Command
Shows the short form of the command
Long
Shows the long form of the command
Parameter
The type of parameter, if any, accepted by the command. The
minimum and maximum value of numeric parameters can be
accessed by the option MINimum or MAXimum.
Parameter
Suffix
The suffixes that may follow the parameter.
Description
A detailed description of what the command does.
Example
Example programming statements