Keysight 81150A - Output Configuration; Output Function

Features and Functions
81150A and 81160A User’s Guide 99
3.2 Output Configuration
Introduction
This section contains information to help you configure the 81150A /
81160A for outputting waveforms. You may never have to change some of
the parameters discussed here, but they are provided to give you the
flexibility you might need.
3.2.1 Output Function
Introduction
The 81150A / 81160A can output five standard waveforms (sine, square,
ramp, pulse, and noise), plus dc. You can also select one of six built-in
arbitrary waveforms or create your own custom waveforms. You can
internally modulate sine, square, ramp, and arbitrary waveforms using AM,
FM, PM, or FSK. You can also modulate pulse using PWM. Linear or
logarithmic frequency sweeping is available for sine, square, ramp, and
arbitrary waveforms. You can generate a burst waveform using any of the
standard or arbitrary waveforms (but not dc and noise). The default function
is sine wave.