Keysight 81150A - Selecting am Modulation

Features and Functions
81150A and 81160A User’s Guide 181
3.7.1 Selecting AM Modulation
Front-Panel
Operation
The 81150A / 81160A will allow only one modulation mode to be enabled at
a time. For example, you cannot enable AM and FM at the same time. When
you enable AM, the previous modulation mode is turned off.
AM is enabled by default.
Remote Interface
Operation
To avoid multiple waveform changes, enable AM after you have set up the
other modulation parameters.
:AM[1|2]:STATe {ON|OFF}