Keysight 81150A - Arming Slope

Appendix
96
Remote Interface
Operation
:ARM:SOURce {INTernal2|EXTernal|MANual}
Selecting the source of the arming signal is related to setting the triggering
mode of the instrument. See section 3.1 for more details.
3.1.2 Arming Slope
Introduction
Trigger events can be generated on the rising edge, the falling edge, or on
both edges of the selected arming signal.
Front Panel
Operation
On the Trigger Mode screen, press the Trig’d by or Gated by softkey. You
can also use the navigation keys to select the Trig’d by or Gated by key.
Choose the appropriate option from the given options as shown below.