Keysight 81150A - 3 Features and Functions

Appendix
90
3 Features and Functions
Introduction
This section makes it easy to look up all the details about a particular
feature of the 81150A / 81160A. Whether you are operating the 81150A /
81160A from the front panel or over the remote interface, this chapter will
be useful.
What’s inside this
Chapter
This section contains the following sections:
 Trigger Mode
 Output Configuration
 Input Configuration
 Pulse Waveforms
 Pattern Capabilities
 Noise
 Amplitude Modulation (AM)
 Frequency Modulation (FM)
 Phase Modulation (PM)
 Frequency-Shift Keying (FSK) Modulation
 Pulse Width Modulation (PWM)
 Frequency Sweep
 Burst Mode
 Arbitrary Waveforms
 Creating and Storing an Arbitrary Waveform
 Managing Stored Waveforms
 Additional Information on Arbitrary Waveforms
 System-Related Operations
 Remote Interface Configuration
 Software Update
 Installing Licenses
 Diagnostics/Calibration Overview
 Security
 Factory Default Settings