Keysight 81150A - Page 262

Appendix
262
Press
Export/Import
softkey
 Press the Export State/Import State softkey to store to recall from
USB memory devices.
 Choose from DELETE/STORE/RECALL and press the corresponding
softkey.
 Press the File Name softkey to define/set file name. This name will
be used for storing the instrument state using the STORE softkey.
The waveform editor is also able to store to a USB memory device. In this
case you need to select Store in NON-VOL and on the waveform browser
you have to press the leftmost softkey (Memory Int/USB). This softkey
toggles between the internal waveform storage locations and the content of
the USB memory device.
The same key is to be used when selecting a waveform that is stored on an
USB memory device.