Keysight 81150A - Page 291

Features and Functions
81150A and 81160A User’s Guide 291
Front Panel
Operation
Press and then the System softkey and then press the Diagnostics
softkey. The Diagnostics screen contains the following:
 Power On Messages
 Selftest
 Extended Selftest
 Calibration
Power-On Results
Press the Power-On Messages softkey to review the result of the power-on
test.
Performing Selftest
Press the Selftest softkey to execute the standalone selftest.
Remove all cables from the instrument before starting the extended selftest.
Performing
Extended Selftest
Press the Extended Selftest softkey to reach this screen. Press Yes to start
Extended Selftest and No to exit.
Remove all cables from the instrument before starting the extended selftest.