Keysight 81150A - Page 362

Appendix
362
Level Commands
Command
:VOLTage[1|2]
Long
[:SOURCE]:VOLTage[1|2]
[:LEVel][:IMMediate][:AMPLitude]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
VPP, VRMS, DBM, V
Description
Set the output amplitude. MIN selects the smallest amplitude MAX selects
the largest amplitude for the selected function. The :VOLT[1|2]:UNIT
command specifies the unit the amplitude will be interpreted (VPP, VRMS or
DBM).
Example
:VOLT2 4.12