Keysight 81150A - Page 393

Remote Programming Reference
81150A and 81160A User’s Guide 393
Command
:FSKey[1|2]:INT:RATE[?]
Long
[:SOURCE]:FSKey[1|2]:INTernal:RATE[?]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
HZ
Description
Set the rate at which the output frequency “shifts” between the carrier and
hop frequency. The :FSK[1|2]:RATE? query returns the FSK rate in
Hertz. The FSK rate is only used when the Internal source is selected
(FSK[1|2]:SOUR INT command) and is ignored when the external
source is selected (FSK:SOUR[1|2] EXT command)
Example
:FSK1:INT:RATE 10HZ