Keysight 81150A - Page 454

Appendix
454
Command
:PULS:FREQ[1|2][?]
Long
[:SOURce]:PULSe:FREQuency[1|2][:CW|:FIXed][?]
Parameters
{<NR3>|MINimum|MAXimum}
Parameter Suffix
HZ
Description
Set the output frequency. The :PULS:FREQ[1|2]? query returns the
frequency setting in hertz for the function currently selected. MIN selects
the lowest actual possible frequency allowed for the selected function. MAX
selects the highest actual possible frequency allowed.
Example
:PULS:FREQ2 222.22KHZ