Keysight 81150A - Page 460

Appendix
460
Command
:PULS:TRAN[1|2]:HOLD[?]
Long
[:SOURce]:PULSe:TRANsition[1|2]:HOLD[?]
Parameters
{TIME|WRATio}
Parameter Suffix

Description
It’s used to set the coupling between transition times and the pulse width.
TIME
The absolute transition times are held when the pulse width
is varied.
WRATio
The ratio of transition time to pulse width is held when the
pulse width is varied.
Example
:PULS:TRAN2:HOLD TIME