Keysight 81150A - Page 543

Remote Programming Reference
81150A and 81160A User’s Guide 543
Command
:DIG:SEL
Long
:DIGital[1|2][:STIMulus][:PATTern]:SELect
Parameters
<name>
Parameter Suffix
–
Description
Use this command to select a named data block. The name can be one of
the built-in pattern names (PRBS_7, PRBS_15, etc.), a user-defined pattern
name that has been stored with :DIG:COPY before or the name VOLATILE
to select the pattern that is currently in volatile memory.
Example
:DIG:SEL MY_PATTERN