Keysight 81150A - Page 664

Appendix
664
Set/read channel amplitude current
[:SOURce]:CURRent[1|2][:LEVel][:IMMediate][:AMPLitude]<value>
Set/read channel offset current
[:SOURce]:CURRent[1|2][:LEVel][:IMMediate]:OFFSet <value>
Set/read channel high-level current
[:SOURce]:CURRent[1|2][:LEVel][:IMMediate]:HIGH <value>
Set/read channel low-level current
[:SOURce]:CURRent[1|2][:LEVel][:IMMediate]:LOW <value>
Set/read maximum current limit
[:SOURce]:CURRent[1|2]:LIMit[:HIGH] <value>
Set/read minimum current limit
[:SOURce]:CURRent[1|2]:LIMit:LOW <value>
Enable/disable the current limits
[:SOURce]:CURRent[1|2]:LIMit:STATe {ON|OFF}
CLK-IN Input SCPI subsystem
Measure frequency at CLK-IN
[:SOURce]:FREQuency[:CW|FIXed]:AUTO {ONCE}
Measure period at CLK-IN
[:SOURce]:PERiod:AUTO {ONCE}
Set/read impedance of CLK-IN
:TRIGger:IMPedance <value>
Set/read threshold of CLK-IN
:TRIGger:LEVel <value>
Set/read trigger slope CLK-IN
:TRIGger:SLOPe POS|NEG
Reference Clock SCPI subsystem
Set/read frequency of external PLL reference
[:SOURce]:ROSCillator:EXTernal:FREQuency <value>
Mass Memory SCPI subsystem