Keysight 81150A - Page 87

Front-Panel Menu Operation
81150A and 81160A User’s Guide 87
Configure the “DNS
Setup” (optional)
DNS (Domain Name Service) is an Internet service that translates domain
names into IP addresses. Ask your network administrator whether DNS is in
use, and if it is, ask for the host name and DNS server address to use.
Steps:
 Start at the “LAN” menu.
 Press the DNS Setup softkey to display the “Host Name” field.
Set the “Host
Name”
Steps:
 Press the Host Name softkey and enter the host name. The host
name is the host portion of the domain name, which is translated
into an IP address. The host name is entered as a string using the
knob and cursor keys to select and change characters. The host
name may include letters, numbers, and dashes (“-”). You can use
the keypad for the numeric characters only.
 Press to delete all characters to the right of the cursor
position.
Set the “Domain
Name”
The Domain Name cannot be changed. But, the name that was detected by
the Operating System is displayed for information.