Keysight 81160A - Page 123

Features and Functions
81150A and 81160A User’s Guide 123
Channel Coupling
Introduction
The Keysight 81150A / 81160A allows to use the two channels completely
independent, or in a frequency and phase locked mode.
Characteristics
In the Channel Coupling mode, the frequency and phase of both the
channels are locked. Locking the output frequency and phase of both
channels does have a noticeable effect on most of the major modes of
operation.
Therefore, as a result of coupling, the output function, and all other
parameters like, burst, sweep, and modulation are also kept identical on
both channels.
Refer to the Appendix for complete list of coupled parameters and Tutorial
for more details.
Front Panel
Operation
Press the and key to select the channel that defines the
setting that will be used when enabling channel coupling.
Then press the key to enable channel coupling.
Remote Interface
Operation
The following function is used to configure Channel Coupling remotely:
:TRACk:CHANnel[1|2] {ON|OFF}