Front-Panel Menu Operation
81150A and 81160A User’s Guide 45
2.13 Setting the Output Amplitude
At power-on, normally, the instrument outputs the same setting as before
power-down.
When you change functions, the same amplitude is used if the present value
is valid for the new function.
The following steps show you how to change the amplitude:
To set the amplitude using a high level and low level, press the Ampl
softkey.
This will offer the level representations and units that can be chosen
for the output levels.
Choose the appropriate option from the given choices.
Press More to go to the units screen. Choose from the given units, by
pressing that unit itself.
To Next Page
Loading...
