Keysight 81160A - Page 44

Appendix
44
Select the desired
units
Select and press the softkey that corresponds to the desired units. Press the
More softkey to view more units available for the current selection. When
you select the units, the 81150A / 81160A outputs a waveform with the
displayed frequency (if the output is enabled).
 You can also enter the desired value using the knob and cursor keys.
 You can also change the exponent by setting the input cursor to the
exponent field and turning the Rotary Knob. To do this, use the
left/right key to place the cursor on the exponent you wish to
change.