EasyManua.ls Logo

Keysight 81160A - Pattern Source

Keysight 81160A
672 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
150
3.5.2 Pattern Source
Introduction
The pattern source can be Internal/External.
When selecting the internal pattern source, the 81150A / 81160A does
generate the pattern internally either algorithmically or from memory.
Additionally it is possible to provide an externally generated data stream at
MOD-IN for re-shaping by the 81150A / 81160A. To do this, select the
external pattern source.
For details on external pattern, refer to the External Patterns section.
Front Panel
Operation
After selecting the Pattern Setup softkey, press the Pattern Source softkey.
The Pattern Source can be Internal or External.
If the Pattern Source is Internal, one of the built-in or user-defined
patterns or a PRBS can be selected.
If the Pattern Source is External, the pattern data is supplied on the
MOD-IN connector on the rear-panel of the 81150A / 81160A.

Table of Contents

Related product manuals