Keysight 81160A - Modulating Waveform Frequency

Features and Functions
81150A and 81160A User’s Guide 185
3.7.5 Modulating Waveform Frequency
Introduction
The 81150A / 81160A will accept modulation from an internal or external
modulation source. In case of internal modulation, the modulation signal can
be the ‘other channel’ (2 channel instrument only) or the internal modulation
source of the modulated channel.
Modulating frequency (internal source):
81150A: 1 mHz to 10 MHz.
81160A: 1 mHz to 50 MHz.
The default is 100 Hz.
Front-Panel
Operation
After enabling AM, press the AM Frequency softkey.
Remote Interface
Operation
:AM[1|2]:INTernal:FREQuency{<frequency>|MINimum|
MAXimum}