Front-Panel Menu Operation
81150A and 81160A User’s Guide 83
Use the knob and cursor keys or the numeric keypad to select a GPIB
address in the range 0 through 31 (the factory default is “10”). The GPIB
address is shown on the front-panel display at power-on.
Press the Enter softkey to enter the GPIB address and exit.
Your computer’s GPIB interface card has its own address. Be sure to avoid
using the computer’s address for any instrument on the interface bus.
2.31.2 USB Configuration
The USB interface requires no front panel configuration parameters. Just
connect your Keysight 81150A / 81160A to your PC using a standard USB
cable and the interface will self configure.
To Next Page
Loading...
