Keysight 81160A - Output Frequency

Features and Functions
81150A and 81160A User’s Guide 101
3.2.2 Output Frequency
Introduction
The output frequency range depends on the function selected, as shown in
the table below. The default frequency is 1 MHz for all functions.
Function
Minimum Frequency
Maximum Frequency
Sine
1 Hz
81150A: 240 MHz
81160A: 500 MHz
Square
1 Hz
81150A: 120 MHz
81160A: 330 MHz
Ramp
1 Hz
81150A: 5 MHz
81160A: 20 MHz
Pulse
1 Hz
81150A: 120 MHz
81160A: 330 MHz
Pattern
1 Hz
81150A: 120 MHz (10 MHz
for external patterns)
81160A: 660 MHz (10 MHz
for external patterns)
Noise, DC
Not Applicable
Not Applicable
Arbs
1 Hz
81150A: 120 MHz
81160A: 330 MHz
Burst Limitations
The maximum frequency when doing burst is 120 MHz for the 81150A (330
MHz for the 81160A). This frequency limit applies additionally to the
functions max frequency limit. Practically, this is only relevant for sine
waves, since all other waveforms have a maximum frequency of 120 MHz for
the 81150A (330 MHz for the 81160A).