There are seven built-in arbitrary waveforms stored in non-volatile memory.
You can also store up to four user-defined waveforms in non-volatile
memory in addition to one in volatile memory.
81150A: Each waveform can contain between 2 and 524288 data points.
81160A 1 channel: Each waveform can contain between 2 and 262144 data
points.
81150A 2 channels: Each waveform can contain between 2 and 131072 data
points.
You can create an arbitrary waveform from the front panel as described in
the following section, or you can use the Keysight BenchLink Waveform
Builder software provided on the CD-ROM included with the Keysight
81150A or 81160A. The Keysight BenckLink Wabeform Builder software
allows you to create arbitrary waveforms using a graphical user interface on
your PC, and then download them into the Keysight 81150A / 81160A. You
can also capture waveforms from your Keysight oscilloscope and import
them into BenchLink.
Refer to the Tutorial chapter for more information on the internal operation
of downloading and outputting an arbitrary waveform.
To Next Page
Loading...
